![1403940763](https://alkhalidiagroup.com/wp-content/uploads/2022/09/1403940763.jpg)
Analytical Testing and Physical Services:
* | Aggregate |
* | Soil |
* | Analytical chemical testing of water, waste water, oil and other materials. |
* | Gas Emission Monitoring |
* | Crude Oil |
* | Waste Water |
* | Cement, asphalt, agricultural sand, wood/plywood, steel and other building and construction materials |
Material Division
Magnum Industrial Laboratories W.L.L
The laboratory is an ISO 9001, ISO 14001, ISO 45001 certified and ISO 17025 accredited (Calibration) independent testing house whose procedures confirm to internationally recognised standards. The focus and approach of this Independent Laboratory is to provide complete analytical services to Core Industries, Process Units, Ministries, Construction companies and other private sector organisations. It acts in association with the leading inspection and test center of the region.
It provides the following services to Ministries, Industrial, commercial and private sectors:
Physical and Non-destructive Testing (NDT):
* | Radiography (RT) |
* | Magnetic Particle Inspection (MPI) |
* | Ultrasonic Testing (UT) |
* | Die Penetrant Inspection (DPI) |
* | Post and Pre-Heat Treatment |
Metallurgy Testing
FERROUS AND NON-FERROUS MATERIAL MECHANICAL TESTING
Mechanical testing laboratory is one of our core testing services. With mechanical testing, we cover wide of test which primarily aims to determine a material’s mechanical properties.
- Base Material Test for compliance to material specification
- Welder Qualification Test to certify the welder proficiency
- Welder Procedure Qualification Test to verify the welding procedure
COMPLETE SET OF MECHANICAL TESTS
Magnum offers all the mechanical tests required for Qualification of Metal, Qualification of Welding Procedure, and Qualification of Welder. Our facility includes Mechanical test but not limited to:
- Tensile Test, transverse/longitudinal to establish the properties such as Young modulus, yield (or proof) stress, tensile stress and % elongation to failure
- 3-point or 4-point longitudinal/transverse bend tests
- Nick break & fracture tests on welded joints to check the weld soundness
- Charpy impact test specimens at ambient or cryogenic temperatures
- Hardness test using a variety of hardness testers (Brinell, Rockwell, Vickers)
![](https://alkhalidiagroup.com/wp-content/uploads/2022/09/universal.jpg)
UNIVERSAL TESTING MACHINE
![](https://alkhalidiagroup.com/wp-content/uploads/2022/09/charpy-300x300.jpg)
CHARPY IMPACT TESTER
![](https://alkhalidiagroup.com/wp-content/uploads/2022/09/hardness.jpg)
HARDNESS TESTER
METALLOGRAPHY – MIRROR POLISH TO REVEAL MICROSTRUCTURE
A team of qualified and experienced metallurgists perform the metallurgical evaluation of samples by metallography. Scanning Electron Microscopy (SEM/EDS) equipment provides magnification to 300,000X for microanalysis of very small samples and areas of interest.
METALLURGICAL TESTS
Our metallurgical testing services incorporate optical microscopy to characterize material microstructure. The evaluation of sample by our experience metallurgist includes but not limited to given as below.
- Microstructural Evaluation
- Grain Size Measurement
- Inclusion Count
- Ferrite Content
- Coating Thickness
- Case Depth
- Carburizing
- Thermal Damage
- Micro Hardness
Macroscopic and Microscopic examinations, give information about defects, flow pattern after forging, rolling direction, inclusion content/cleanliness, type of structure (Austenite/Ferrite/Bainite/Martensite), Grain Size, amount of Ferrite, Depth of (de)carburization etc.
REPLICA METALLOGRAPY
Field metallography testing by replica technique is the specialty of EILAB & extensively utilized as a part of asset integrity, condition assessment and FFS evaluation. As a brief the replica technique is used for below assets or equipment.
- Boiler Tubes
- Heat Exchanger tubes
- Reactor Tubes,
- Furnace Tubes
- Inline Pipe, Tanks
Contact Details
MAGNUM INDUSTRIAL LABROTARIES W.L.L
Flat: 21, Building: 1284, Road: 5136
Block: 951, Askar,
P.O Box 28869,
Kingdom of Bahrain
TELEPHONE: +973-17832288
FAX: +973-17832299